EP80579 Datasheet, PDF (1773/1916 Pages) Intel Corporation – Intel® EP80579 Integrated Processor Product Line

Intel^® EP80579 Integrated Processor
Table 48-31. Power and Ground Summary Pin List (Sheet 2 of 2)
Signal Name
VCCGBE33
VCCSATA33
VCC50
VCC50_SUS
VCCA[1]
VCCA[2]
VCCABG3P3_USB
VCCABGP033
VCCAHPLL
VCCAPE
VCCAPE0PLL12
VCCAPLL
VCCARX
VCCASATABG3P3
VCCATX
VCCVC
VCC25
VCCSUS25
VCCPRTC
VCCPSUS
VCCGBEPSUS
VCCRPE
VCCSATA
VCCSUS1
VCCVC
VSS
VSSA
VTTDDR
Signal Description Normal/Alternate Mode
Ball
Count
3.3V power supply for Gigabit Ethernet interfaces.
1
3.3V power supply for SATA interface.
1
5.0V power supply
7
5.0V power supply for 5.0V tolerance in sustain well
1
1.20V power supply for IA-32 core. Minimum voltage is 1.20V-5%, even in low-
power applications.
1
1.20V power supply for IA-32 core. Minimum voltage is 1.20V-5%, even in low-
power applications.
1
3.3V power supply for USB interface. Analog Bandgap Power.
1
3.3V power supply for PCI Express circuitry. Analog Bandgap Power.
1
Analog 1.2V supply for CRU circuitry (CRU PLL and REFCLK inputs).
1
1.2V power supply for PCI Express circuitry. Analog Power.
12
1.2V power supply for PCI Express circuitry. PLL Digital Power.
2
1.2V power supply for SATA interface.
1
1.2V power supply for SATA interface. Analog receiver power.
3
3.3V power supply for SATA interface. Analog Bandgap power.
1
1.2V power supply for SATA interface. Analog transmitter power.
3
1.30V or 1.00V CPU power supply for IA-32 core. This supply is 1.30V for
1200MHz, 1.30V for 1066MHz, and 1.00V for 600MHz (see V_SEL signal
1
description in the ICH Miscellaneous signals).
2.5V power supply for Gigabit Ethernet interfaces.
4
2.5V sustain power supply for Gigabit Ethernet interfaces.
4
3.3V power supply for the RTC (this supply can drop to 2.0V if all other planes are
shut off). This power is not expected to be shut off unless the RTC battery is
removed or drained.mthellomthelloNote: Implementations must not attempt to 1
clear CMOS by using a jumper to pull VCCPRTC low. Clearing CMOS can be done
by using a jumper on RTEST_N or GPI.
3.3V sustain supply for IO logic
3
3.3V sustain supply for IO logic for Gigabit Ethernet interfaces.
1
1.2V power supply for PCI Express circuitry. Digital Receiver Power.
8
1.2V power supply for SATA interface.
2
1.2V sustain supply for core logic
4
1.30V or 1.00V CPU power supply for IA-32 core. This supply is 1.30V for
1200MHz, 1.30V for 1066MHz, and 1.00V for 600MHz (see V_SEL signal
45
description in the ICH Miscellaneous signals).
Ground
292
Analog Ground
1
0.9V power supply for DDR circuitry. Terminal Voltage.
14
TOTAL
549
48.5
Flip-Chip Ball Grid Array (FCBGA) Package Dimensions
The FCBGA package is shown in the following illustrations:
• Figure 48-1, “FCBGA Package — Top and Side Views” on page 1775
August 2009
Order Number: 320066-003US
Intel^® EP80579 Integrated Processor Product Line Datasheet
1773