K60P100M100SF2RM Datasheet, PDF (975/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Chapter 39 FlexTimer (FTM)
39.3.22 Configuration (FTMx_CONF)
This register selects the number of times that the FTM counter overflow should occur
before the TOF bit to be set, the FTM behavior in BDM modes, the use of an external
global time base, and the global time base signal generation.
Addresses: FTM0_CONF is 4003_8000h base + 84h offset = 4003_8084h
FTM1_CONF is 4003_9000h base + 84h offset = 4003_9084h
FTM2_CONF is 400B_8000h base + 84h offset = 400B_8084h
Bit 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R
0
W
Reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit 15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R
0
W
0
0
BDMMODE
NUMTOF
Reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
FTMx_CONF field descriptions
Field
31–11
Reserved
10
GTBEOUT
Description
This read-only field is reserved and always has the value zero.
Global time base output
Enables the global time base signal generation to other FTMs.
9
GTBEEN
0 A global time base signal generation is disabled.
1 _{A global time base signal generation is enabled.}
Global time base enable
Configures the FTM to use an external global time base signal that is generated by another FTM.
8
Reserved
7–6
BDMMODE
5
Reserved
0 Use of an external global time base is disabled.
1 _{Use of an external global time base is enabled.}
This read-only field is reserved and always has the value zero.
BDM Mode
Selects the FTM behavior in BDM mode. See BDM Mode.
This read-only field is reserved and always has the value zero.
Table continues on the next page...
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
975