K60P100M100SF2RM Datasheet, PDF (160/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Human-machine interfaces (HMI)
3.10 Human-machine interfaces (HMI)
3.10.1 GPIO configuration
This section summarizes how the module has been configured in the chip. For a
comprehensive description of the module itself, see the module’s dedicated chapter.
Peripheral
bridge
Register
access
Transfers
GPIO controller
Module signals
Topic
Full description
System memory map
Clocking
Power management
Transfers
Signal Multiplexing
Figure 3-65. GPIO configuration
Table 3-76. Reference links to related information
Related module
GPIO
Crossbar switch
Port control
Reference
GPIO
System memory map
Clock Distribution
Power management
Clock Distribution
Signal Multiplexing
3.10.1.1 GPIO access protection
The GPIO module does not have access protection because it is not connected to a
peripheral bridge slot and is not protected by the MPU.
3.10.1.2 Number of GPIO signals
The number of GPIO signals available on the devices covered by this document are
detailed in Orderable part numbers.
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
160
Freescale Semiconductor, Inc.