K60P100M100SF2RM Datasheet, PDF (1265/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Field
5
Reserved
4
DMPD
3–1
Reserved
0
Reserved
Chapter 45 Universal Serial Bus OTG Controller (USBOTG)
USBx_OBSERVE field descriptions (continued)
Description
This read-only field is reserved and always has the value zero.
Provides observability of the D- Pull Down signal output from the USB OTG module.
0 D- pulldown disabled.
1 D- pulldown enabled.
This read-only field is reserved and always has the value zero.
This read-only field is reserved and always has the value zero.
45.4.26 USB OTG Control Register (USBx_CONTROL)
Addresses: USB0_CONTROL is 4007_2000h base + 108h offset = 4007_2108h
Bit
7
6
5
4
3
2
1
0
Read
0
0
Write
Reset
0
0
0
0
0
0
0
0
USBx_CONTROL field descriptions
Field
Description
7–5
Reserved
This read-only field is reserved and always has the value zero.
4
Provides control of the DP PULLUP in the USB OTG module, if USB is configured in non-OTG
DPPULLUPNONOTG device mode.
3–0
Reserved
0 DP Pull up in non-OTG device mode is not enabled.
1 DP Pull up in non-OTG device mode is enabled.
This read-only field is reserved and always has the value zero.
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
1265