K60P100M100SF2RM Datasheet, PDF (583/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Chapter 25 Oscillator (OSC)
25.10 Low Power Modes Operation
When the MCU enters Stop modes, the OSC is functional depending on ERCLKEN and
EREFSETN bit settings. If both these bits are set, the OSC is in operation. In Low
Leakage Stop (LLS) modes, the OSC holds all register settings. If ERCLKEN and
EREFSTEN bits are set before entry to Low Leakage Stop modes, the OSC is still
functional in these modes. After waking up from Very Low Leakage Stop (VLLSx)
modes, all OSC register bits are reset and initialization is required through software.
25.11 Interrupts
The OSC module does not generate any interrupts.
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
583