K60P100M100SF2RM Datasheet, PDF (962/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Memory Map and Register Definition
FTMx_COMBINE field descriptions (continued)
Field
2
DECAPEN0
Dual Edge Capture Mode Enable for n = 0
Description
Enables the dual edge capture mode in the channels (n) and (n+1). This bit reconfigures the function of
MSnA, ELSnB:ELSnA and ELS(n+1)B:ELS(n+1)A bits in dual edge capture mode according to Table
39-7.
This field applies only when FTMEN = 1.
This field is write protected. It can be written only when MODE[WPDIS] = 1.
1
COMP0
0 The dual edge capture mode in this pair of channels is disabled.
1 The dual edge capture mode in this pair of channels is enabled.
Complement of Channel (n) for n = 0
Enables complementary mode for the combined channels. In complementary mode the channel (n+1)
output is the inverse of the channel (n) output.
This field is write protected. It can be written only when MODE[WPDIS] = 1.
0
COMBINE0
0 The channel (n+1) output is the same as the channel (n) output.
1 The channel (n+1) output is the complement of the channel (n) output.
Combine Channels for n = 0
Enables the combine feature for channels (n) and (n+1).
This field is write protected. It can be written only when MODE[WPDIS] = 1.
0 Channels (n) and (n+1) are independent.
1 Channels (n) and (n+1) are combined.
39.3.15 Deadtime Insertion Control (FTMx_DEADTIME)
This register selects the deadtime prescaler factor and deadtime value. All FTM channels
use this clock prescaler and this deadtime value for the deadtime insertion.
Addresses: FTM0_DEADTIME is 4003_8000h base + 68h offset = 4003_8068h
FTM1_DEADTIME is 4003_9000h base + 68h offset = 4003_9068h
FTM2_DEADTIME is 400B_8000h base + 68h offset = 400B_8068h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
W
DTVAL
Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FTMx_DEADTIME field descriptions
Field
31–8
Reserved
Description
This read-only field is reserved and always has the value zero.
Table continues on the next page...
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
962
Freescale Semiconductor, Inc.