K60P100M100SF2RM Datasheet, PDF (1774/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Memory map and register definition
TSIx_STATUS field descriptions (continued)
Field
25
ERROF9
24
ERROF8
23
ERROF7
22
ERROF6
21
ERROF5
20
ERROF4
19
ERROF3
18
ERROF2
17
ERROF1
16
ERROF0
15
ORNGF15
14
ORNGF14
Description
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 9
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 8
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 7
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 6
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 5
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 4
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 3
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 2
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 1
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
TouchSensing Error Flag 0
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
Touch Sensing Electrode Out-of-Range Flag 15
This bit indicates when the corresponding electrode is out of range. If the GENCS[TSIIE] bit is set and the
GENCS[ESOR] bit is cleared, an out-of-range interrupt is generated. Write a one to clear this bit.
Touch Sensing Electrode Out-of-Range Flag 14
Table continues on the next page...
1774
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.