K60P100M100SF2RM Datasheet, PDF (1766/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Memory map and register definition
TSIx_GENCS field descriptions (continued)
Field
18–16
PS
15
EOSF
14
OUTRGF
13
EXTERF
12
OVRF
11–10
Reserved
9
SCNIP
8
SWTS
7
TSIEN
6
TSIIE
11001
11010
11011
11100
11101
11110
11111
26 times per electrode
27 times per electrode
28 times per electrode
29 times per electrode
30 times per electrode
31 times per electrode
32 times per electrode
Electrode oscillator prescaler
Description
000 Electrode oscillator frequency divided by 1
001 Electrode oscillator frequency divided by 2
010 Electrode oscillator frequency divided by 4
011 Electrode oscillator frequency divided by 8
100 Electrode oscillator frequency divided by 16
101 Electrode oscillator frequency divided by 32
110 Electrode oscillator frequency divided by 64
111 Electrode oscillator frequency divided by 128
End of scan flag
Write 1 to clear the flag.
Out of Range Flag
Write 1 to clear the flag.
External electrode error occurred
0 No short
1 Short to VDD or VSS occured on the electrodes
Overrun error flag
0 No overrun
1 Overrun occurred
This read-only field is reserved and always has the value zero.
Scan-in-progress status
Indicates if a scanning process is in progress. This bit is read-only and is changed automatically by the
TSI module.
Software trigger start
Setting this bit starts a scan sequence. Writing zero to this bit has no effect.
TSI module enable
0 TSI disabled
1 TSI enabled
TSI interrupt enable
Table continues on the next page...
1766
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.