K60P100M100SF2RM Datasheet, PDF (277/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Chapter 12 System integration module (SIM)
SIM_SOPT4 field descriptions (continued)
Field
Description
NOTE: The selected pin must also be configured for the FTM2 module external clock function through
the appropriate pin control register in the port control module.
25
FTM1CLKSEL
0 FTM2 external clock driven by FTM_CLK0 pin.
1 FTM2 external clock driven by FTM_CLK1 pin.
FTM1 External Clock Pin Select
Selects the external pin used to drive the clock to the FTM1 module.
NOTE: The selected pin must also be configured for the FTM external clock function through the
appropriate pin control register in the port control module.
0 FTM_CLK0 pin
1 FTM_CLK1 pin
24
FTM0CLKSEL
FlexTimer 0 External Clock Pin Select
Selects the external pin used to drive the clock to the FTM0 module.
NOTE: The selected pin must also be configured for the FTM external clock function through the
appropriate pin control register in the port control module.
0 FTM_CLK0 pin
1 FTM_CLK1 pin
23–22
Reserved
21–20
FTM2CH0SRC
This read-only field is reserved and always has the value zero.
FTM2 channel 0 input capture source select
Selects the source for FTM2 channel 0 input capture.
NOTE: When the FTM is not in input capture mode, clear this field.
19–18
FTM1CH0SRC
00 FTM2_CH0 signal
01 CMP0 output
10 CMP1 output
11 Reserved
FTM1 channel 0 input capture source select
Selects the source for FTM1 channel 0 input capture.
NOTE: When the FTM is not in input capture mode, clear this field.
17–9
Reserved
8
FTM2FLT0
00 FTM1_CH0 signal
01 CMP0 output
10 CMP1 output
11 Reserved
This read-only field is reserved and always has the value zero.
FTM2 Fault 0 Select
Selects the source of FTM2 fault 0.
Table continues on the next page...
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
277