K60P100M100SF2RM Datasheet, PDF (344/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Memory map/register definition
LLWU_PE4 field descriptions (continued)
Field
1–0
WUPE12
Description
10 External input pin enabled with falling edge detection
11 External input pin enabled with any change detection
Wakeup Pin Enable for LLWU_P12
Enables and configures the edge detection for the wakeup pin.
00 External input pin disabled as wakeup input
01 External input pin enabled with rising edge detection
10 External input pin enabled with falling edge detection
11 External input pin enabled with any change detection
15.3.5 LLWU Module Enable Register (LLWU_ME)
LLWU_ME contains the bits to enable the internal module flag as a wakeup input source
for inputs MWUF7-MWUF0.
NOTE
This register is unaffected by wakeup from low leakage modes
(exit from LLS via RESET or any exit from VLLS).
Address: LLWU_ME is 4007_C000h base + 4h offset = 4007_C004h
Bit
Read
Write
Reset
7
WUME7
0
6
WUME6
0
5
WUME5
0
4
WUME4
0
3
WUME3
0
2
WUME2
0
LLWU_ME field descriptions
Field
7
WUME7
Wakeup Module Enable for Module 7
Description
Enables an internal module as a wakeup source input.
6
WUME6
0 Internal module flag not used as wakeup source
1 Internal module flag used as wakeup source
Wakeup Module Enable for Module 6
Enables an internal module as a wakeup source input.
5
WUME5
0 Internal module flag not used as wakeup source
1 Internal module flag used as wakeup source
Wakeup Module Enable for Module 5
Enables an internal module as a wakeup source input.
Table continues on the next page...
1
WUME1
0
0
WUME0
0
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
344
Freescale Semiconductor, Inc.