K60P100M100SF2RM Datasheet, PDF (451/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Field
15
Reserved
14
CPE
13–12
Reserved
11–8
ERRCHN
7
SAE
6
SOE
5
DAE
4
DOE
3
NCE
2
SGE
Chapter 21 Direct Memory Access Controller (eDMA)
DMA_ES field descriptions (continued)
Description
This read-only field is reserved and always has the value zero.
Channel Priority Error
0 No channel priority error
1 The last recorded error was a configuration error in the channel priorities. Channel priorities are not
unique.
This read-only field is reserved and always has the value zero.
Error Channel Number or Cancelled Channel Number
The channel number of the last recorded error (excluding CPE errors) or last recorded error cancelled
transfer.
Source Address Error
0 No source address configuration error.
1 The last recorded error was a configuration error detected in the TCDn_SADDR field. TCDn_SADDR
is inconsistent with TCDn_ATTR[SSIZE].
Source Offset Error
0 No source offset configuration error
1 The last recorded error was a configuration error detected in the TCDn_SOFF field. TCDn_SOFF is
inconsistent with TCDn_ATTR[SSIZE].
Destination Address Error
0 No destination address configuration error
1 The last recorded error was a configuration error detected in the TCDn_DADDR field. TCDn_DADDR
is inconsistent with TCDn_ATTR[DSIZE].
Destination Offset Error
0 No destination offset configuration error
1 The last recorded error was a configuration error detected in the TCDn_DOFF field. TCDn_DOFF is
inconsistent with TCDn_ATTR[DSIZE].
NBYTES/CITER Configuration Error
0 No NBYTES/CITER configuration error
1 The last recorded error was a configuration error detected in the TCDn_NBYTES or TCDn_CITER
fields.
• TCDn_NBYTES is not a multiple of TCDn_ATTR[SSIZE] and TCDn_ATTR[DSIZE], or
• TCDn_CITER[CITER] is equal to zero, or
• TCDn_CITER[ELINK] is not equal to TCDn_BITER[ELINK]
Scatter/Gather Configuration Error
0 No scatter/gather configuration error
1 The last recorded error was a configuration error detected in the TCDn_DLASTSGA field. This field is
checked at the beginning of a scatter/gather operation after major loop completion if
TCDn_CSR[ESG] is enabled. TCDn_DLASTSGA is not on a 32 byte boundary.
Table continues on the next page...
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
451