K60P100M100SF2RM Datasheet, PDF (138/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Timers
3.8.5 CMT Configuration
This section summarizes how the module has been configured in the chip. For a
comprehensive description of the module itself, see the module’s dedicated chapter.
Peripheral bus
controller 0
Register
access
CMT
Module signals
Topic
Full description
System memory map
Clocking
Power management
Signal multiplexing
Figure 3-49. CMT configuration
Table 3-60. Reference links to related information
Related module
Carrier modulator
transmitter (CMT)
Port control
Reference
CMT
System memory map
Clock distribution
Power management
Signal multiplexing
3.8.5.1 Instantiation Information
This device contains one CMT module.
3.8.5.2 IRO Drive Strength
The IRO pad requires higher current drive than can be obtained from a single pad. For
this device, the pin associated with the CMT_IRO signal is doubled bonded to two pads.
The SOPT2[CMTUARTPAD] field in SIM module can be used to configure the pin
associated with the CMT_IRO signal as a higher current output port pin.
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
138
Freescale Semiconductor, Inc.