|
K60P100M100SF2RM Datasheet, PDF (655/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual | |||
|
◁ |
FCMD
0x00
0x01
0x02
0x03
0x06
0x08
0x09
Chapter 28 Flash Memory Module (FTFL)
Command
Program
flash 0
Read 1s Block Ã
Program
flash 1
(Devices
with only
program
flash)
Ã
Data flash
(Devices
with
FlexNVM)
Ã
Read 1s
Ã
Ã
Ã
Section
Program Check Ã
Ã
Ã
Read Resource IFR
IFR
IFR
Program
Ã
Ã
Ã
Longword
Erase Flash
Ã
Ã
Ã
Block
Erase Flash
Ã
Ã
Ã
Sector
FlexRAM
(Devices
with
FlexNVM)
Function
Verify that a
program flash
or data flash
block is erased.
FlexNVM block
must not be
partitioned for
EEPROM.
Verify that a
given number of
program flash
or data flash
locations from a
starting address
are erased.
Tests
previously-
programmed
locations at
margin read
levels.
Read 4 bytes
from program
flash IFR, data
flash IFR, or
version ID.
Program 4
bytes in a
program flash
block or a data
flash block.
Erase a
program flash
block or data
flash block. An
erase of any
flash block is
only possible
when
unprotected.
FlexNVM block
must not be
partitioned for
EEPROM.
Erase all bytes
in a program
flash or data
flash sector.
Table continues on the next page...
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
655
|
▷ |