K60P100M100SF2RM Datasheet, PDF (654/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Flash Operation in Low-Power Modes
START
FCCOB
Availability Check
Read: FSTAT register
no
CCIF
= ‘1’?
Previous command complete?
yes
Results from previous command
Access Error and
Protection Violation
Check
ACCERR/
yes
FPVIOL
Set?
no
Write to the FCCOB registers
to load the required command parameter.
Clear the old errors
Write 0x30 to FSTAT register
More
yes
Parameters?
no
Clear the CCIF to launch the command
Write 0x80 to FSTAT register
EXIT
Figure 28-34. Generic FTFL Command Write Sequence Flowchart
28.4.10.2 FTFL Commands
The following table summarizes the function of all FTFL commands. If the program
flash, data flash, or FlexRAM column is marked with an 'X', the FTFL command is
relevant to that particular memory resource.
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
654
Freescale Semiconductor, Inc.