K60P100M100SF2RM Datasheet, PDF (66/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Module Functional Categories
Module
Real-time clock (RTC)
IEEE 1588 timers
Table 2-8. Timer modules (continued)
Description
• Independent power supply, POR, and 32 kHz Crystal Oscillator
• 32-bit seconds counter with 32-bit Alarm
• 16-bit Prescaler with compensation that can correct errors between 0.12
ppm and 3906 ppm
• The 10/100 Ethernet module contains timers to provide IEEE 1588 time
stamping
2.3.8 Communication interfaces
The following communication interfaces are available on this device:
Table 2-9. Communication modules
Module
Description
Ethernet MAC with IEEE 1588 capability 10/100 MB/s Ethernet MAC (MII and RMII) with hardware support for IEEE 1588
(ENET)
USB OTG (low-/full-speed)
USB 2.0 compliant module with support for host, device, and On-The-Go modes.
Includes an on-chip transceiver for full and low speeds.
USB Device Charger Detect (USBDCD) The USBDCD monitors the USB data lines to detect a smart charger meeting the
USB Battery Charging Specification Rev1.1. This information allows the MCU to
better manage the battery charging IC in a portable device.
USB voltage regulator
Up to 5 V regulator input typically provided by USB VBUS power with 3.3 V
regulated output that powers on-chip USB subsystem, capable of sourcing 120 mA
to external board components.
Controller Area Network (CAN)
Supports the full implementation of the CAN Specification Version 2.0, Part B
Serial peripheral interface (SPI)
Synchronous serial bus for communication to an external device
Inter-integrated circuit (I2C)
Allows communication between a number of devices. Also supports the System
Management Bus (SMBus) Specification, version 2.
Universal asynchronous receiver/
transmitters (UART)
Asynchronous serial bus communication interface with programmable 8- or 9-bit
data format and support of ISO 7816 smart card interface
Secure Digital host controller (SDHC)
Interface between the host system and the SD, SDIO, MMC, or CE-ATA cards.
The SDHC acts as a bridge, passing host bus transactions to the cards by sending
commands and performing data accesses to/from the cards. It handles the SD,
SDIO, MMC, and CE-ATA protocols at the transmission level.
I2S
The I²S is a full-duplex, serial port that allows the chip to communicate with a
variety of serial devices, such as standard codecs, digital signal processors
(DSPs), microprocessors, peripherals, and audio codecs that implement the inter-
IC sound bus (I²S) and the Intel^® AC97 standards
2.3.9 Human-machine interfaces
The following human-machine interfaces (HMI) are available on this device:
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
66
Freescale Semiconductor, Inc.