|
K60P100M100SF2RM Datasheet, PDF (1476/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual | |||
|
◁ |
Introduction
⢠11-bit break character detection option
⢠Independent FIFO structure for transmit and receive
⢠Two receiver wakeup methods:
⢠Idle line wakeup
⢠Address mark wakeup
⢠Address match feature in receiver to reduce address mark wakeup ISR overhead
⢠Ability to select MSB or LSB to be first bit on wire
⢠Hardware flow control support for request to send (RTS) and clear to send (CTS)
signals
⢠Support for ISO 7816 protocol for interfacing with SIM cards and smart cards
⢠Support of T=0 and T=1 protocols
⢠Automatic retransmission of NACK'd packets with programmable retry
threshold
⢠Support for 11 and 12 ETU transfers
⢠Detection of initial packet and automated transfer parameter programming
⢠Interrupt-driven operation with seven ISO-7816 specific interrupts
⢠Wait time violated
⢠Character wait time violated
⢠Block wait time violated
⢠Initial frame detected
⢠Transmit error threshold exceeded
⢠Receive error threshold exceeded
⢠Guard time violated
⢠Interrupt-driven operation with 12 flags (not specific to ISO-7816 support):
⢠Transmitter data buffer at or below watermark
⢠Transmission complete
⢠Receiver data buffer at or above watermark
⢠Idle receiver input
1476
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
|
▷ |