K60P100M100SF2RM Datasheet, PDF (1281/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Field
23–17
Reserved
16
IE
15–9
Reserved
8
IF
7–1
Reserved
0
IACK
Chapter 46 USB Device Charger Detection Module (USBDCD)
USBDCD_CONTROL field descriptions (continued)
Description
Determines whether the charger detection sequence is initiated.
0b0 Do not start the sequence. Writes of this value have no effect.
0b1 Initiate the charger detection sequence. If the sequence is already running, writes of this value
have no effect.
This read-only field is reserved and always has the value zero.
Interrupt Enable
Enables/disables interrupts to the system.
0b0 Disable interrupts to the system.
0b1 Enable interrupts to the system.
This field is reserved.
Interrupt Flag
Determines whether an interrupt is pending
0b0 No interrupt is pending.
0b1 An interrupt is pending.
This read-only field is reserved and always has the value zero.
Interrupt Acknowledge
Determines whether the interrupt is cleared.
0b0 Do not clear the interrupt.
0b1 Clear the IF bit (interrupt flag).
46.4.2 Clock Register (USBDCD_CLOCK)
Address: USBDCD_CLOCK is 4003_5000h base + 4h offset = 4003_5004h
Bit 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
R
0
W
Reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Bit 15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
R
0
W
0
CLOCK_SPEED
Reset 0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
1
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
1281