K60P100M100SF2RM Datasheet, PDF (102/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Memories and Memory Interfaces
3.5.1.4 Flash Memory Map
The various flash memories and the flash registers are located at different base addresses
as shown in the following figure. The base address for each is specified in System
memory map.
Flash memory base address
Registers
Program flash base address
Program flash
Flash configuration field
Programming acceleration
RAM base address
RAM
Figure 3-21. Flash memory map for devices containing only program flash
Flash memory base address
Registers
Program flash base address
Program flash
Flash configuration field
FlexNVM base address
FlexNVM
FlexRAM base address
FlexRAM
Figure 3-22. Flash memory map for devices containing FlexNVM
3.5.1.5 Flash Security
How flash security is implemented on this device is described in Chip Security.
3.5.1.6 Flash Modes
The flash memory operates in NVM normal and NVM special modes. The flash memory
enters NVM special mode when the EzPort is enabled (EZP_CS asserted during reset), or
the system is under debug mode. Otherwise, flash memory operates in NVM normal
mode.
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
102
Freescale Semiconductor, Inc.