|
K60P100M100SF2RM Datasheet, PDF (1388/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual | |||
|
◁ |
Initialization/Application Information
⢠If Rx FIFO was enabled, the ID filter table must be initialized
⢠Other entries in each Message Buffer should be initialized as required
⢠Initialize the Rx Individual Mask Registers
⢠Set required interrupt mask bits in the IMASK Registers (for all MB interrupts), in
CTRL Register (for Bus Off and Error interrupts) and in MCR Register for Wake-Up
interrupt
⢠Negate the HALT bit in MCR
Starting with the last event, FlexCAN attempts to synchronize to the CAN bus.
1388
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
|
▷ |