K60P100M100SF2RM Datasheet, PDF (1748/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Introduction
54.1.2.1 Run mode
In run mode, the GPIO operates normally.
54.1.2.2 Wait mode
In wait mode, the GPIO operates normally.
54.1.2.3 Stop mode
The GPIO is disabled in stop mode, although the pins retain their state.
54.1.2.4 Debug mode
In debug mode, the GPIO operates normally.
54.1.3 GPIO signal descriptions
Table 54-1. GPIO signal descriptions
Signal
Description
I/O
PORTA[31:0]
General purpose input/output
I/O
PORTB[31:0]
General purpose input/output
I/O
PORTC[31:0]
General purpose input/output
I/O
PORTD[31:0]
General purpose input/output
I/O
PORTE[31:0]
General purpose input/output
I/O
NOTE
Not all pins within each port are implemented on each device.
Refer to the Signal Multiplexing chapter for the number of
GPIO ports available in the device.
1748
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.