K60P100M100SF2RM Datasheet, PDF (139/1809 Pages) Freescale Semiconductor, Inc – K60 Sub-Family Reference Manual

Chapter 3 Chip Configuration
3.8.6 RTC configuration
This section summarizes how the module has been configured in the chip. For a
comprehensive description of the module itself, see the module’s dedicated chapter.
Peripheral
bridge
Register
access
Real-time clock
Module signals
Topic
Full description
System memory map
Clocking
Power management
Figure 3-50. RTC configuration
Table 3-61. Reference links to related information
Related module
RTC
Reference
RTC
System memory map
Clock Distribution
Power management
3.8.6.1 RTC_CLKOUT signal
When the RTC is enabled and the port control module selects the RTC_CLKOUT
function, the RTC_CLKOUT signal is fixed to a 1 Hz output.
3.8.6.2 RTC_WAKEUP signal
The RTC_WAKEUP pin is not supported on this device.
3.8.6.3 RTC seconds interrupt
The RTC seconds interrupt is not supported on this device.
K60 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.
139