SH7763 Datasheet, PDF (949/2026 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 23 Gigabit Ethernet Controller (GETHER)
23.3.52 CAM Entry Table POST3 Register (TSU_POST3)
When using the CAM, the conditions for referring to each CAM entry table can be specified by
using the TSU_POST1 to TSU_POST4 registers. TSU_POST3 specifies the conditions for
referring to TSU_ADRH16 to TSU_ADRH23 and TSU_ADRL16 to TSU_ADRL23. The settings
of this register are valid when the POSTENL bit in TSU_FWSLC is set to 1.
Bit: 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
POST16[3:0]
POST17[3:0]
POST18[3:0]
POST19[3:0]
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
POST20[3:0]
POST21[3:0]
POST22[3:0]
POST23[3:0]
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit
Bit Name
31 to 28 POST16[3:0]
27 to 24 POST17[3:0]
Initial
Value
All 0
All 0
R/W Description
R/W These bits set the conditions for referring to CAM entry
table 16. By setting multiple bits to 1, multiple
conditions can be selected.
POST16[3]: CAM entry table 16 is referred to in port 0
reception.
POST16[2]: CAM entry table 16 is referred to in port 0
to 1 relay.
POST16[1]: CAM entry table 16 is referred to in port 1
reception.
POST16[0]: CAM entry table 16 is referred to in port 1
to 0 relay.
R/W These bits set the conditions for referring to CAM entry
table 17. By setting multiple bits to 1, multiple
conditions can be selected.
POST17[3]: CAM entry table 17 is referred to in port 0
reception.
POST17[2]: CAM entry table 17 is referred to in port 0
to 1 relay.
POST17[1]: CAM entry table 17 is referred to in port 1
reception.
POST17[0]: CAM entry table 17 is referred to in port 1
to 0 relay.
Rev. 1.00 Oct. 01, 2007 Page 883 of 1956
REJ09B0256-0100