SH7763 Datasheet, PDF (354/2026 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 9 Interrupt Controller (INTC)
Module
GPIO
Bit
10
9
8
7 to 4
3
2
1
0
Source Function
Description
PINT6I
PINT5I
PINT4I
—
PINT3I
GPIO interrupt from PINT6 pin
GPIO interrupt from PINT5 pin
GPIO interrupt from PINT4 pin
These bits are always read as 0. The
write value should always be 0.
GPIO interrupt from PINT3 pin
Indicates GPIO interrupt
sources. This register
indicates GPIO interrupt
sources even if mask
setting is made in the
interrupt mask register
for them.
PINT2I GPIO interrupt from PINT2 pin
PINT1I GPIO interrupt from PINT1 pin
PINT0I GPIO interrupt from PINT0 pin
INT2B9: Indicates detailed interrupt sources for the GETHER.
Module
GETHER
Bit
31 to 3
2
1
0
Source Function
Description
—
GEINT2
GEINT1
GEINT0
These bits are always read as 0. The
write value should always be 0.
GEINT2 interrupt
GEINT1 interrupt
GEINT0 interrupt
Indicates GETHER
interrupt sources. This
register indicates the
GETHER interrupt
sources even if mask
setting is made in the
interrupt mask register
for them.
INT2B10: Indicates detailed interrupt sources for the USBF.
Module
USBF
Bit
31 to 2
1
0
Source Function
Description
—
USBFI1
USBFI0
These bits are always read as 0. The Indicates USBF
write value should always be 0.
interrupt sources. This
USBFI1 interrupt
register indicates the
USBF interrupt sources
USBFI0 interrupt
even if mask setting is
made in the interrupt
mask register for them.
Rev. 1.00 Oct. 01, 2007 Page 288 of 1956
REJ09B0256-0100