SH7763 Datasheet, PDF (807/2026 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 20 16-Bit Timer Pulse Unit (TPU)
(1) Example of Phase Counting Mode Setting Procedure
Figure 20.14 shows an example of the phase counting mode setting procedure.
Phase counting mode
Select phase counting mode [1]
Set external pin function
[2]
[1] Select phase counting mode with bits MD3 to
MD0 in TMDR.
[2] Set the external pin function in pin function
controller (PFC).
[3] Set the CST bit in TSTR to 1 to start the count
operation.
Start count
[3]
<Phase counting mode>
Figure 20.14 Example of Phase Counting Mode Setting Procedure
Rev. 1.00 Oct. 01, 2007 Page 741 of 1956
REJ09B0256-0100