SH7763 Datasheet, PDF (944/2026 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 23 Gigabit Ethernet Controller (GETHER)
Bit
Bit Name
23 to 20 POST2[3:0]
19 to 16 POST3[3:0]
15 to 12 POST4[3:0]
Initial
Value
All 0
All 0
All 0
R/W Description
R/W These bits set the conditions for referring to CAM entry
table 2. By setting multiple bits to 1, multiple conditions
can be selected.
POST2[3]: CAM entry table 2 is referred to in port 0
reception.
POST2[2]: CAM entry table 2 is referred to in port 0 to
1 relay.
POST2[1]: CAM entry table 2 is referred to in port 1
reception.
POST2[0]: CAM entry table 2 is referred to in port 1 to
0 relay.
R/W These bits set the conditions for referring to CAM entry
table 3. By setting multiple bits to 1, multiple conditions
can be selected.
POST3[3]: CAM entry table 3 is referred to in port 0
reception.
POST3[2]: CAM entry table 3 is referred to in port 0 to
1 relay.
POST3[1]: CAM entry table 3 is referred to in port 1
reception.
POST3[0]: CAM entry table 3 is referred to in port 1 to
0 relay.
R/W These bits set the conditions for referring to CAM entry
table 4. By setting multiple bits to 1, multiple conditions
can be selected.
POST4[3]: CAM entry table 4 is referred to in port 0
reception.
POST4[2]: CAM entry table 4 is referred to in port 0 to
1 relay.
POST4[1]: CAM entry table 4 is referred to in port 1
reception.
POST4[0]: CAM entry table 4 is referred to in port 1 to
0 relay.
Rev. 1.00 Oct. 01, 2007 Page 878 of 1956
REJ09B0256-0100