SH7763 Datasheet, PDF (1623/2026 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 36 USB Function Controller (USBF)
36.3.40 Set Time Out Register (STOH/STOL)
STOH/STOL specifies the time out value of the timer register. When the count value of the timer
register reaches the specified time out value, the time out interrupt flag in the interrupt flag register
4 is set.
STOH/STOL is handled as a 16-bit (STO[15:0]) register in the USBF which consists of
STO[15:8] bits in STOH and STO[7:0] bits in STOL. Although STOH can be read directly STOL
is read via an 8-bit temporary register. Therefore, the registers should be read in the order of
STOH and STOL in byte units. STOL cannot be read singly.
• STOH
Bit: 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
————————————————
Initial value: — — — — — — — — — — — — — — — —
R/W: R R R R R R R R R R R R R R R R
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
STO[15:8]
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit
Bit Name
31 to 8 
7 to 0 STO[15:8]
Initial Value R/W
Undefined R
0
R/W
Description
Reserved
These bits are always read as undefined value. The
write value should always be 0.
Upper Eight Bits of Specified Time Out Value
Rev. 1.00 Oct. 01, 2007 Page 1557 of 1956
REJ09B0256-0100