SH7763 Datasheet, PDF (945/2026 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 23 Gigabit Ethernet Controller (GETHER)
Bit
11 to 8
Bit Name
POST5[3:0]
7 to 4 POST6[3:0]
3 to 0 POST7[3:0]
Initial
Value
All 0
All 0
All 0
R/W Description
R/W These bits set the conditions for referring to CAM entry
table 5. By setting multiple bits to 1, multiple conditions
can be selected.
POST5[3]: CAM entry table 5 is referred to in port 0
reception.
POST5[2]: CAM entry table 5 is referred to in port 0 to 1
relay.
POST5[1]: CAM entry table 5 is referred to in port 1
reception.
POST5[0]: CAM entry table 5 is referred to in port 1 to 0
relay.
R/W These bits set the conditions for referring to CAM entry
table 6. By setting multiple bits to 1, multiple conditions
can be selected.
POST6[3]: CAM entry table 6 is referred to in port 0
reception.
POST6[2]: CAM entry table 6 is referred to in port 0 to 1
relay.
POST6[1]: CAM entry table 6 is referred to in port 1
reception.
POST6[0]: CAM entry table 6 is referred to in port 1 to 0
relay.
R/W These bits set the conditions for referring to CAM entry
table 7. By setting multiple bits to 1, multiple conditions
can be selected.
POST7[3]: CAM entry table 7 is referred to in port 0
reception.
POST7[2]: CAM entry table 7 is referred to in port 0 to 1
relay.
POST7[1]: CAM entry table 7 is referred to in port 1
reception.
POST7[0]: CAM entry table 7 is referred to in port 1 to 0
relay.
Rev. 1.00 Oct. 01, 2007 Page 879 of 1956
REJ09B0256-0100