SH7763 Datasheet, PDF (1381/2026 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 31 Multimedia Card Interface (MMCIF)
Bit
1
0
Note:
Initial
Bit Name Value R/W Description
Interrupt
output
DTERI
0
R/(W)* Data Timeout Error Flag
[Setting 1 condition]
ERR
When a data timeout error specified in
DTOUTR occurs while DTERIE = 1.
[Clearing 0 condition]
Write 0 after reading DTERI = 1.
Note:
When the data timeout error
occurs, abort the command
sequence by setting the
CMDOFF bit to 1 and then clear
the DTERI flag.
CTERI
0
R/(W)* Command Timeout Error Flag
[Setting 1 condition]
ERR
When a command timeout error specified
in TOCR occurs while CTERIE = 1.
[Clearing condition]
Write 0 after reading CTERI = 1.
Note:
When the command timeout error
occurs, abort the command
sequence by setting the
CMDOFF bit to 1 and then clear
the CTERI flag.
* Cleared by writing 0 after reading 1
Rev. 1.00 Oct. 01, 2007 Page 1315 of 1956
REJ09B0256-0100