SH7763 Datasheet, PDF (639/2026 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 14 Direct Memory Access Controller (DMAC)
14.3.2 DMA Source Address Registers (SARB0 to SARB3)
SARB is 32-bit readable/writable registers that specify the source address of a DMA transfer that
is set in SAR again in repeat/reload mode. Data to be written from the CPU to SAR is also written
to SARB. To set SARB address that differs from SAR address, write data to SARB after SAR.
To transfer data in word or in longword units, specify the address with word or longword address
boundary. When transferring data in 16-byte or in 32-byte units, a 16-byte or 32-byte boundary
must be set for the source address value. The initial value is undefined.
Bit: 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SARB
Initial value: — — — — — — — — — — — — — — — —
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
SARB
Initial value: — — — — — — — — — — — — — — — —
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
14.3.3 DMA Destination Address Registers (DAR0 to DAR5)
DAR is 32-bit readable/writable registers that specify the destination address of a DMA transfer.
During a DMA transfer, these registers indicate the next destination address.
To transfer data in word or in longword units, specify the address with word or longword address
boundary. When transferring data in 16-byte or in 32-byte units, a 16-byte or 32-byte boundary
must be set for the destination address value. The initial value is undefined.
Bit: 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DAR
Initial value: — — — — — — — — — — — — — — — —
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
DAR
Initial value: — — — — — — — — — — — — — — — —
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Rev. 1.00 Oct. 01, 2007 Page 573 of 1956
REJ09B0256-0100