SH7205 Datasheet, PDF (946/1904 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 19 Serial Sound Interface with FIFO (SSIF)
SCKP = 0, SWSP = 0, DEL = 0, CHNL = 11, SPDP = 0, SDTA = 1
System word length = data word length × 4
SSISCK
SSIWS
SSIDATA
MSB
LSB MSB
LSB MSB
LSB MSB
LSB
Data
word 1
Data
word 2
Data
word 3
Data
word 4
MSB
LSB MSB
LSB MSB LSB MSB
LSB
Data
word 5
Data
word 6
Data
word 7
Data
word 8
System word 1
System word 2
Figure 19.9 Multi-Channel Format (8 Channels; Transmitting and Receiving in
the order of serial data and Padding Bits; with padding)
(7) Bit Setting Configuration Format
Several more configuration bits in non-compressed mode are shown below. These bits are not
mutually exclusive, but some combinations may not be useful for any other device.
These configuration bits are described below with reference to figure 19.10.
SWL = 6 bits (not attainable in SSI module, demonstration only)
DWL = 4 bits (not attainable in SSI module, demonstration only)
CHNL = 00, SCKP = 0, SWSP = 0, SPDP = 0, SDTA = 0, PDTA = 0, DEL = 0, MUEN = 0
4-bit data samples continuously written to SSITDR are transmitted onto the serial audio bus.
SSISCK
SSIWS
1st channel
2nd channel
SSIDATA TD28 0 0 TD31 TD30 TD29 TD28 0 0 TD31 TD30 TD29 TD28 0 0 TD31
Key for this and following diagrams:
Arrow head indicates sampling point of receiver
TDn
Bit n in SSITDR
0
means a low level on the serial bus (padding or mute)
1
means a high level on the serial bus (padding)
Figure 19.10 Basic Sample Format
(Transmit Mode with Example System/Data Word Length)
Rev. 1.00 Mar. 25, 2008 Page 914 of 1868
REJ09B0372-0100