SH7205 Datasheet, PDF (901/1904 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 18 I²C Bus Interface 3 (IIC3)
SCL
(Master output)
SDA
(Master output)
SCL
(Slave output)
SDA
(Slave output)
RDRF
ICDRS
ICDRR
User
processing
9
1
2
3
4
5
6
7
8
9
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
A
A
Data 1
Data 2
Data 1
[3] Set ACKBT
[3] Read ICDRR [4] Read ICDRR
Figure 18.12 Slave Receive Mode Operation Timing (2)
18.4.6 Clocked Synchronous Serial Format
This module can be operated with the clocked synchronous serial format, by setting the FS bit in
SAR to 1. When the MST bit in ICCR1 is 1, the transfer clock output from SCL is selected. When
MST is 0, the external clock input is selected.
(1) Data Transfer Format
Figure 18.13 shows the clocked synchronous serial transfer format.
The transfer data is output from the fall to the fall of the SCL clock, and the data at the rising edge
of the SCL clock is guaranteed. The MLS bit in ICMR sets the order of data transfer, in either the
MSB first or LSB first. The output level of SDA can be changed during the transfer wait, by the
SDAO bit in ICCR2.
SCL
SDA Bit 0 Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7
Figure 18.13 Clocked Synchronous Serial Transfer Format
Rev. 1.00 Mar. 25, 2008 Page 869 of 1868
REJ09B0372-0100