SH7205 Datasheet, PDF (750/1904 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 15 Realtime Clock (RTC)
15.3.16 RTC Control Register 1 (RCR1)
RCR1 is a register that affects carry flags and alarm flags. It also selects whether to generate
interrupts for each flag.
The CF flag remains undefined until the divider circuit is reset (the RESET and ADJ bits in RCR2
are set to 1). When using the CF flag, make sure to reset the divider circuit beforehand.
BIt: 7
6
CF -
Initial value: -
0
R/W: R/W R
5
4
3
2
- CIE AIE -
0
0
0
0
R R/W R/W R
1
0
- AF
0
0
R R/W
Initial
Bit Bit Name Value
R/W Description
7
CF
Undefined R/W Carry Flag
Status flag that indicates that a carry has occurred. CF
is set to 1 when a count-up to 64-Hz occurs at the
second counter carry or 64-Hz counter read. A count
register value read at this time cannot be guaranteed;
another read is required.
0: No carry of 64-Hz counter by second counter or 64-
Hz counter
[Clearing condition]
When 0 is written to CF
1: Carry of 64-Hz counter by second counter or 64 Hz
counter
[Setting condition]
When the second counter or 64-Hz counter is read
during a carry occurrence by the 64-Hz counter, or 1 is
written to CF.
6, 5 —
All 0
R
Reserved
These bits are always read as 0. The write value should
always be 0.
Rev. 1.00 Mar. 25, 2008 Page 718 of 1868
REJ09B0372-0100