English
Language : 

SH7764 Datasheet, PDF (857/1752 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series
Section 21 USB 2.0 Host/Function Module (USB)
Section 21 USB 2.0 Host/Function Module (USB)
The USB 2.0 host/function module (USB) is a USB controller which provides capabilities as a
USB host controller and USB function controller function. This module supports high-speed
transfer defined by USB (universal serial bus) Specification 2.0 and full-speed transfer when used
as the host controller, and supports high-speed transfer and full-speed transfer when used as the
function controller. This module has a USB transceiver and supports all of the transfer types
defined by the USB specification.
This module has a 5-Kbyte buffer memory for data transfer, providing a maximum of ten pipes.
Any endpoint numbers can be assigned to PIPE1 to PIPE9, based on the peripheral devices or user
system for communication.
21.1 Features
(1) Host Controller and Function Controller Supporting USB High-Speed Operation
• The USB host controller and USB function controller are incorporated.
• The USB host controller and USB function controller can be switched by register settings.
• USB transceiver is incorporated.
(2) Reduced Number of External Pins and Space-Saving Installation
• The VBUS signal can be directly connected to the input pin of this module.
• On-chip D+ pull-up resistor (during USB function operation)
• On-chip D+ and D- pull-down resistor (during USB host operation)
• On-chip D+ and D- terminal resistor (during high-speed operation)
• On-chip D+ and D- output impedance (during full-speed operation)
(3) All Types of USB Transfers Supported
• Control transfer
• Bulk transfer
• Interrupt transfer (high bandwidth transfers not supported)
• Isochronous transfer (high bandwidth transfers not supported)
(4) Internal Bus Interfaces
• Two DMA interface channels are incorporated.
Rev. 1.00 Nov. 22, 2007 Page 801 of 1692
REJ09B0360-0100