SH7764 Datasheet, PDF (1191/1752 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 23 G2D
(8) RLINED
(a) Function
Performs antialiasing for the exterior frame of a polygon with a relative coordinate specification
from the current pointer value. This command can only be executed for a 16-bit/pixel destination.
(b) Command Format
• LINKE = 0
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OP CODE = 1011_0111
Reserve (all 0)
Draw Mode
Reserve (all 0)
n (1 ≤ n ≤ 65535)
Sign DX2 (-128 ≤ DX2 ≤ 127) Sign DY2 (-128 ≤ DY2 ≤ 127) Sign DX1 (-128 ≤ DX1 ≤ 127) Sign DY1 (-128 ≤ DY1 ≤ 127)
Sign
:
Sign
:
Sign
:
Sign
:
Sign
:
Sign
:
Sign
:
Sign
:
Sign DXn (-128 ≤ DXn ≤ 127) Sign DYn (-128 ≤ DYn ≤ 127) Sign DXn-1 (-128 ≤ DXn-1 ≤ 127) Sign DYn-1 (-128 ≤ DYn-1 ≤ 127)
Notes: 1. When n = 0, correct operation is not guaranteed.
2. When n is an odd number, insert a dummy word of 0 at the end.
• LINKE = 1 and LREL = 0
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OP CODE = 1011_0111
Reserve (all 0)
Draw Mode
Reserve (all 0)
n (1 ≤ n ≤ 65535)
000
LINK Address (longword address)
00
Notes: 1. When n = 0, correct operation is not guaranteed.
2. When n is an odd number, insert a dummy word of 0 at the end.
3. The longword address following the LINK Address is handled as the next command
code. Therefore, do not specify the longword address following the address where the
LINK Address is to be assigned as the link destination address specified by the LINK
Address.
Rev. 1.00 Nov. 22, 2007 Page 1135 of 1692
REJ09B0360-0100