SH7764 Datasheet, PDF (1222/1752 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 23 G2D
23.2.6 Control Commands
(1) MOVE
(a) Function
Sets the current pointer.
(b) Command Format
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OP CODE = 0100_1000
Reserve (all 0)
Draw Mode
XC (-32768 ≤ XC ≤ 32767)
YC (-32768 ≤ YC ≤ 32767)
1. Code
B'01001000
2. Rendering Attributes
Draw Mode
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed Fixed
to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0 to 0
3. Command Parameters
XC:
YC:
Rendering coordinate (absolute coordinate) or work coordinate
(absolute coordinate). Negative number expressed as two's
complement.
Rendering coordinate (absolute coordinate) or work coordinate
(absolute coordinate). Negative number expressed as two's
complement.
Rev. 1.00 Nov. 22, 2007 Page 1166 of 1692
REJ09B0360-0100