SH7764 Datasheet, PDF (1202/1752 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 23 G2D
3. Command Parameters
n (n = 1 to 65,535): Number of vertices
Xmin:
Xmin value in the circumscribed quadrangle of the polygon. Work
coordinate (absolute coordinate). Negative number expressed as two's
complement.
Ymin:
Ymin value in the circumscribed quadrangle of the polygon. Work
coordinate (absolute coordinate). Negative number expressed as two's
complement.
Xmax:
Xmax value in the circumscribed quadrangle of the polygon. Work
coordinate (absolute coordinate). Negative number expressed as two's
complement.
Ymax:
Ymax value in the circumscribed quadrangle of the polygon. Work
coordinate (absolute coordinate). Negative number expressed as two's
complement.
DXn (n = 1 to 65,535): Work coordinate (relative coordinate). Negative number expressed as
two's complement.
DYn (n = 1 to 65,535): Work coordinate (relative coordinate). Negative number expressed as
two's complement.
LINK Address:
LINK absolute address (Longword address. Write 0 to bits A31 to
A29, A1, and A0.)
LINK relative address (Longword address. Negative number
expressed as two's complement. Bits A31 to A29 are used to extend
the sign in bit A28. Write 0 to bits A1 and A0.)
Note: Even in 32-bit addressing mode, write the values in bits 28 to 3 of the specified 32-bit
address to bits A28 to A3.
Rev. 1.00 Nov. 22, 2007 Page 1146 of 1692
REJ09B0360-0100