SH7764 Datasheet, PDF (1232/1752 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC Engine Family SH-4A Series

Section 23 G2D
(c) Description
Changes the display list fetch destination to the specified address.
When REL = 0, the jump destination address can be specified as an absolute address. When REL
= 1, the jump destination address can be specified as a relative address with respect to the memory
address at which the command code is located.
(d) Example
Display list area
Register setting
command
Drawing starts
Drawing command
JUMP command
:
:
Drawing command
Drawing command
Rev. 1.00 Nov. 22, 2007 Page 1176 of 1692
REJ09B0360-0100