SH7263 Datasheet, PDF (823/1862 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 16 Synchronous Serial Communication Unit (SSU)
16.3.2 SS Control Register L (SSCRL)
SSCRL selects operating mode, software reset, and transmit/receive data length.
Bit: 7
6
5
4
3
2
1
0
- SSUMS SRES -
-
-
DATS[1:0]
Initial value: 0
0
0
0
0
0
0
0
R/W: R R/W R/W R R R R/W R/W
Initial
Bit
Bit Name Value R/W
7
⎯
0
R/W
6
SSUMS 0
R/W
5
SRES
0
R/W
4 to 2 ⎯
All 0
R
1, 0 DATS[1:0] 00
R/W
Description
Reserved
This bit is always read as 0. The write value should
always be 0.
Selects transfer mode from SSU mode and clock
synchronous mode.
0: SSU mode
1: Clock synchronous mode
Software Reset
Setting this bit to 1 forcibly resets the SSU internal
sequencer. After that, this bit is automatically cleared.
The ORER, TEND, TDRE, RDRF, and CE bits in SSSR
and the TE and RE bits in SSER are also initialized.
Values of other bits for SSU registers are held.
To stop transfer, set this bit to 1 to reset the SSU
internal sequencer.
Reserved
These bits are always read as 0. The write value should
always be 0.
Transmit/Receive Data Length Select
Select serial data length.
00: 8 bits
01: 16 bits
10: 32 bits
11: Setting prohibited
Rev. 2.00 Mar. 14, 2008 Page 789 of 1824
REJ09B0290-0200