SH7263 Datasheet, PDF (624/1862 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 11 Multi-Function Timer Pulse Unit 2 (MTU2)
11.4.10 TCNT Capture at Crest and/or Trough in Complementary PWM Operation
The TCNT value is captured in TGR at either the crest or trough or at both the crest and trough
during complementary PWM operation. The timing for capturing in TGR can be selected by
TIOR.
Figure 11.77 shows an example in which TCNT is used as a free-running counter without being
cleared, and the TCNT value is captured in TGR at the specified timing (either crest or trough, or
both crest and trough).
TGRA_4
Tdead
Upper arm signal
Lower arm signal
Inverter output monitor signal
Dead time delay signal
Up-count/down-count signal (udflg)
TCNT[15:0]
3DE7
TGR[15:0]
Tdelay
3E5B
3DE7
3E5B
3ED3
3F37
3ED3
3F37
3FAF
3FAF
Figure 11.77 TCNT Capturing at Crest and/or Trough in Complementary PWM Operation
Rev. 2.00 Mar. 14, 2008 Page 590 of 1824
REJ09B0290-0200