SH7263 Datasheet, PDF (1256/1862 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 24 AND/NAND Flash Memory Controller (FLCTL)
24.4.5 Sector Access Mode
In sector access mode, flash memory can be read or programmed in sector units by specifying the
number of physical sectors to be accessed. In programming, an ECC is added. In read, an ECC
error check (detection) is performed.
Since 512-byte data is stored in FLDTFIFO and 16-byte control code is stored in FLECFIFO, the
DREQ1EN and DREQ0EN bits in FLINTDMACR can be set to transfer by the DMA.
Figure 24.14 shows the relationship of DMA transfer between sectors in flash memory (data and
control code) and memory on the address space.
Flash memory
Data (512 bytes)
Control
code
(16 bytes)
Address area (external memory area)
FLCTL
FLDT FIFO
FLEC FIFO
DMA (channel 0)
transfer
Data area
DMA (channel 1)
transfer
Control code area
Figure 24.14 Relationship between DMA Transfer and Sector (Data and Control Code),
and Memory and DMA Transfer
Rev. 2.00 Mar. 14, 2008 Page 1222 of 1824
REJ09B0290-0200