SH7263 Datasheet, PDF (1396/1862 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 25 USB 2.0 Host/Function Module (USB)
25.5 Usage Notes
25.5.1 Note on Using Isochronous OUT Transfer
When the following conditions (1 and 2) are met, use the pipe settings in the table below for
isochronous (hereinafter referred to as ISO)-OUT transfer.
1. Host mode is in use
2. Full-speed transfer
Note: This note does not apply when high-speed transfer in host mode has been selected or
function mode (including the selection of full-speed transfer) is used.
PIPE1
PIPE2
PIPE6
ISO-OUT transfer is in ISO-OUT
use on PIPE1
Unused or BULK-
IN/OUT
Unused or INT-IN/OUT
ISO-OUT transfer is in Unused, ISO-IN, or
use on PIPE2
BULK-IN/OUT
ISO-OUT
Unused
Note: ISO-OUT transfer cannot be used on both PIPE1 and PIPE2 (two pipes). When two pipes
would be needed for ISO-OUT transfer, use high-speed transfer.
Rev. 2.00 Mar. 14, 2008 Page 1362 of 1824
REJ09B0290-0200