SH7263 Datasheet, PDF (1327/1862 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 25 USB 2.0 Host/Function Module (USB)
Bit
Bit Name
Initial
Value R/W Description
8
CNTMD
0
R/W Continuous Transfer Mode
This bit is valid when bulk transfer (TYPE = 01) is
selected for PIPE1 to PIPE5. CNTMD = 1 should not
be set when isochronous transfer has been selected
(TYPE = 11). This bit should not be set to 1 for
PIPE6 and PIPE7.
0: Non-continuous transfer mode
1: Continuous transfer mode
7
SHTNAK
0
R/W Pipe Disabled at End of Transfer
0: Pipe continued at the end of transfer
1: Pipe disabled at the end of transfer
6, 5
⎯
All 0 R
Reserved
These bits are always read as 0. The write value
should always be 0.
4
DIR
0
R/W Transfer Direction
0: Receiving (OUT transfer)
1: Sending (IN transfer)
3 to 0 EPNUM[3:0] H'0
R/W Endpoint Number
These bits specify the endpoint number for the
corresponding pipe
Note: * When using isochronous OUT transfer, see section 25.5.1, Note on Using Isochronous
OUT Transfer.
Rev. 2.00 Mar. 14, 2008 Page 1293 of 1824
REJ09B0290-0200