SH7263 Datasheet, PDF (1427/1862 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 26 LCD Controller (LCDC)
Initial
Bit
Bit Name Value R/W Description
6
VCPE
0
R/W LCD_VCPWC Pin Enable
Sets whether or not to enable a power-supply control
sequence using the LCD_VCPWC pin.
0: Disabled: LCD_VCPWC pin is masked and fixed low
1: Enabled: LCD_VCPWC pin output is asserted and
negated according to the power-on or power-off
sequence
5
VEPE
0
R/W LCD_VEPWC Pin Enable
Sets whether or not to enable a power-supply control
sequence using the LCD_VEPWC pin.
0: Disabled: LCD_VEPWC pin is masked and fixed low
1: Enabled: LCD_VEPWC pin output is asserted and
negated according to the power-on or power-off
sequence
4
DONE
1
R/W LCD_DON Pin Enable
Sets whether or not to enable a power-supply control
sequence using the LCD_DON pin.
0: Disabled: LCD_DON pin is masked and fixed low
1: Enabled: LCD_DON pin output is asserted and
negated according to the power-on or power-off
sequence
3, 2
⎯
All 0 R
Reserved
These bits are always read as 0. The write value should
always be 0.
1, 0
LPS[1:0] 00
R
LCD Module Power-Supply Input State
Indicates the power-supply input state of the LCD
module when using the power-supply control function.
0: LCD module power off
1: LCD module power on
Rev. 2.00 Mar. 14, 2008 Page 1393 of 1824
REJ09B0290-0200