SH7263 Datasheet, PDF (757/1862 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series

Section 15 Serial Communication Interface with FIFO (SCIF)
Initial
Bit
Bit Name Value R/W Description
3
STOP
0
R/W Stop Bit Length
Selects one or two bits as the stop bit length in
asynchronous mode. This setting is used only in
asynchronous mode. It is ignored in clock synchronous
mode because no stop bits are added.
When receiving, only the first stop bit is checked,
regardless of the STOP bit setting. If the second stop
bit is 1, it is treated as a stop bit, but if the second stop
bit is 0, it is treated as the start bit of the next incoming
character.
0: One stop bit
When transmitting, a single 1-bit is added at the end
of each transmitted character.
1: Two stop bits
When transmitting, two 1 bits are added at the end of
each transmitted character.
2
⎯
0
R Reserved
This bit is always read as 0. The write value should
always be 0.
1, 0
CKS[1:0] 00
R/W Clock Select
Select the internal clock source of the on-chip baud rate
generator. For further information on the clock source,
bit rate register settings, and baud rate, see section
15.3.8, Bit Rate Register (SCBRR).
00: Pφ
01: Pφ/4
10: Pφ/16
11: Pφ/64
Note: Pφ: Peripheral clock
Rev. 2.00 Mar. 14, 2008 Page 723 of 1824
REJ09B0290-0200