SH7760 Datasheet, PDF (908/1345 Pages) Renesas Technology Corp – SuperHTM RISC engine

Bit
Bit Name Initial value R/W Description
3
PJ1MD1
0
2
PJ1MD0
0
R/W PTJ1 Mode
R/W _{00: Peripheral module (DCK)}
01: Port output
Other than above: Setting prohibited
1, 0

All 0
R
Reserved
These bits are always read as 0, and the write
value should always be 0.
Note: *The following settings are prohibited: the combination of port3 set to output and port 4 to
input or port3 to input and port4 to output.
24.2.10 Port K Control Register (PKCR)
PKCR is a 16-bit readable/writable register that selects the pin function and input pull-up MOS
control.
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
PK7 PK7 PK6 PK6 PK5 PK5 PK4 PK4 PK3 PK3 PK2 PK2
MD1 MD0 MD1 MD0 MD1 MD0 MD1 MD0 MD1 MD0 MD1 MD0
-
-
-
-
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R
RR
R
Bit
Bit Name Initial value R/W Description
15
PK7MD1
0
14
PK7MD0
0
R/W PTK7 Mode
R/W _{00: Peripheral module (Reserved/AUD)}
01: Port output
10: Port input (pull-up MOS: Off)
11: Port input (pull-up MOS: On)
13
PK6MD1
0
12
PK6MD0
0
R/W PTK6 Mode
R/W _{00: Peripheral module (Reserved/AUD)}
01: Port output
10: Port input (pull-up MOS: Off)
11: Port input (pull-up MOS: On)
11
PK5MD1
0
10
PK5MD0
0
R/W PTK5 Mode
R/W _{00: Peripheral module (Reserved/AUD)}
01: Port output
10: Port input (pull-up MOS: Off)
11: Port input (pull-up MOS: On)
Rev. 1.0, 02/03, page 858 of 1294