English
Language : 

SH7760 Datasheet, PDF (553/1345 Pages) Renesas Technology Corp – SuperHTM RISC engine
(b) Sleep → Power-on reset
CKIO
Reset
RESET*1
STATUS
Normal*2
Sleep*3
Undefined
Reset*4
Normal*2
0–10 Bcyc*5
0–30 Bcyc*5
Notes:
1. When sleep mode is exited by means of a power-on reset, hold RESET low for the
oscillation stabilization time.
2. Normal : LL (STATUS1 is low and STATUS0 is low)
3. Sleep : HL (STATUS1 is high and STATUS0 is low)
4. Reset : HH (STATUS1 is high and STATUS0 is high)
5. Bcyc : Bus clock cycle
Figure 14.7 STATUS Output in Sequence of Sleep → Power-On Reset
(c) Sleep → Manual reset
Reset
CKIO
RESET (High)
MRESET*1
STATUS
Normal*2
Sleep*3
Reset*4
Normal*2
0–30 Bcyc*5
Notes:
1. Hold MRESET low until STATUS = reset.
2. Normal : LL (STATUS1 is low and STATUS0 is low)
3. Sleep : HL (STATUS1 is high and STATUS0 is low)
4. Reset : HH (STATUS1 is high and STATUS0 is high)
5. Bcyc : Bus clock cycle
0–30 Bcyc*5
Figure 14.8 STATUS Output in Sequence of Sleep → Manual Reset
Rev. 1.0, 02/03, page 503 of 1294