SH7760 Datasheet, PDF (622/1345 Pages) Renesas Technology Corp – SuperHTM RISC engine

Bit
Bit Name Initial Value R/W
Description
6
RTSDT* —
R/W
Serial Port SCIF_RTS Port Data
Specifies the serial port SCIF_RTS pin
input/output data. Input or output is specified by
the RTSIO bit. In output mode, the RTSDT bit
value is output to the SCIF_RTS pin. The
SCIF_RTS pin value is read from the RTSDT bit
regardless of the value of the RTSIO bit. The
initial value of this bit after a power-on reset or
manual reset is undefined.
0: Input/output data is low-level
1: Input/output data is high-level
5
CTSIO* 0
R/W
Serial Port SCIF_CTS Port Input/Output
Specifies the serial port SCIF_CTS pin
input/output condition. When actually setting the
SCIF_CTS pin as a port output pin to output the
value set by the CTSDT bit, the MCE bit in
SCFCR should be cleared to 0.
0: CTSDT bit value is not output to SCIF_CTS
pin
1: CTSDT bit value is output to SCIF_CTS pin
4
CTSDT* —
R/W
Serial Port SCIF_CTS Port Data
Specifies the serial port SCIF_CTS pin
input/output data. Input or output is specified by
the CTSIO bit. In output mode, the CTSDT bit
value is output to the SCIF_CTS pin. The
SCIF_CTS pin value is read from the CTSDT bit
regardless of the value of the CTSIO bit. The
initial value of this bit after a power-on reset or
manual reset is undefined.
0: Input/output data is low-level
1: Input/output data is high-level
Rev. 1.0, 02/03, page 572 of 1294