PXR40RM Datasheet, PDF (614/1434 Pages) Freescale Semiconductor, Inc – PXR40 Microcontroller

FlexRay Communication Controller (FLEXRAY)
This register indicates the lowest numbered receive message buffer and the lowest numbered transmit
message buffer that have their interrupt status flag MBIF and interrupt enable MBIE bits asserted. This
means that message buffers with lower message buffer numbers have higher priority.
Table 22-22. MBIVEC Field Descriptions
Field
TBIVEC
RBIVEC
Description
Transmit Buffer Interrupt Vector — This field provides the number of the lowest numbered enabled transmit
message buffer that has its interrupt status flag MBIF and its interrupt enable bit MBIE set. If there is no transmit
message buffer with the interrupt status flag MBIF and the interrupt enable MBIE bits asserted, the value in this
field is set to 0.
Receive Buffer Interrupt Vector — This field provides the message buffer number of the lowest numbered
receive message buffer which has its interrupt flag MBIF and its interrupt enable bit MBIE asserted. If there is
no receive message buffer with the interrupt status flag MBIF and the interrupt enable MBIE bits asserted, the
value in this field is set to 0.
22.5.2.17 Channel A Status Error Counter Register (CASERCR)
Base + 0x0024
Additional Reset: RUN Command
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
R
STATUS_ERR_CNT
W
Reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Figure 22-17. Channel A Status Error Counter Register (CASERCR)
This register provides the channel status error counter for channel A. The protocol engine generates a slot
status vector for each static slot, each dynamic slot, the symbol window, and the NIT. The slot status vector
contains the four protocol related error indicator bits vSS!SyntaxError, vSS!ContentError, vSS!BViolation,
and vSS!TxConflict. The controller increments the status error counter by 1 if, for a slot or segment, at least
one error indicator bit is set to 1. The counter wraps around after it has reached the maximum value. For
more information on slot status monitoring, see Section 22.6.18, Slot Status Monitoring.
Table 22-23. CASERCR Field Descriptions
Field
Description
STATUS_ERR_CNT Channel Status Error Counter — This field provides the current value channel status error counter. The
counter value is updated within the first macrotick of the following slot or segment.
22.5.2.18 Channel B Status Error Counter Register (CBSERCR)
Base + 0x0026
Additional Reset: RUN Command
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
R
STATUS_ERR_CNT
W
Reset 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Figure 22-18. Channel B Status Error Counter Register (CBSERCR)
22-30
PXR40 Microcontroller Reference Manual, Rev. 1
Freescale Semiconductor