English
Language : 

PXR40RM Datasheet, PDF (330/1434 Pages) Freescale Semiconductor, Inc – PXR40 Microcontroller
Interrupts and Interrupt Controller (INTC)
Table 10-8. Interrupt Request Sources (continued)
Hardware
Vector Mode
Offset
Vector
Number 1
Source2
Description
0x1D90
473
ESCIC_SR[TDRE]
ESCIC_SR[TC]
ESCIC_SR[RDRF]
ESCIC_SR[IDLE]
ESCIC_SR[OR]
ESCIC_SR[NF]
ESCIC_SR[FE]
ESCIC_SR[PF]
ESCIC_SR[BERR]
ESCIC_SR[RXRDY]
ESCIC_SR[TXRDY]
ESCIC_SR[LWAKE]
ESCIC_SR[STO]
ESCIC_SR[PBERR]
ESCIC_SR[CERR]
Combined interrupt requests of eSCI module C:
• LIN status register 1
• LIN status register 2
• SCI status register 2
• Transmit data register empty
• Transmit complete
• Receive data register full
• Idle line
• Overrun
• Noise flag
• Framing error flag
• Parity error flag interrupt requests
• Bit error interrupt request
• Receive data ready
• Transmit data ready
• Received LIN wakeup signal
• Slave timeout
• Physical bus error
• CRC error
0x1DA0
474
Reserved
0x1DB0
475
Reserved
Decimation Filter E–H
0x1DC0
476 DEC_E
Decimation Filter E
0x1DD0
477 DEC_F
Decimation Filter F
0x1DE0
478 DEC_G
Decimation Filter G
0x1DF0
479 DEC_H
Decimation Filter H
1 The maximum vector number (479) is used to identify the location of the last available interrupt vector in memory for this device.
Because blocks of memory throughout the total memory map are used for other purposes, the maximum vector number does
not indicate the total number of available interrupt sources for this device.
2 Interrupt requests from the same module location are ORed together.
NOTE
The peripheral or software configurable interrupt request asserts when the
PRIn value in the interrupt priority select register (INTC_PSRn) is greater
than the PRIn value in interrupt current priority register (INTC_CPR).
If an asserted peripheral or software configurable interrupt request negates
before the processor acknowledges its request, the interrupt request can
reassert and remain asserted. If this occurs, the processor uses the
INTC_PSRn value to locate the IRQ vector, and updates the PRIn value in
the INTC_CPR with the PRIn value in INTC_PSRn.
10-30
PXR40 Microcontroller Reference Manual, Rev. 1
Freescale Semiconductor