PXS20RM Datasheet, PDF (1003/1368 Pages) Freescale Semiconductor, Inc – PXS20 Microcontroller

LIN Controller (LINFlexD)
Table 31-14. LINIER field descriptions (continued)
Field
Description
HEIE
Header Error Interrupt Enable
0: No interrupt on Break Delimiter error, Synch Field error, ID field error
1: Interrupt generated on Break Delimiter error, Synch Field error, ID field error
FEIE
Framing Error Interrupt Enable
0: No interrupt on Framing error
1: Interrupt generated on Framing error
BOIE
Buffer Overrun Interrupt Enable
0: No interrupt on Buffer overrun
1: Interrupt generated on Buffer overrun
LSIE
LIN State Interrupt Enable
0: No interrupt on LIN state change
1: Interrupt generated on LIN state change
This interrupt can be used for debugging purposes. It has no status flag but is reset when writing ‘1111’
into the LIN state bits in the LINSR register.
WUIE
Wake-up Interrupt Enable
0: No interrupt when WUF bit in LINSR or UARTSR is set
1: Interrupt generated when WUF bit in LINSR or UARTSR is set
DBFIE
Data Buffer Full Interrupt Enable
0: No interrupt when buffer data register is full
1: Interrupt generated when data buffer register is full
DBEIETOIE Data Buffer Empty Interrupt Enable / Timeout Interrupt Enable
0: No interrupt when buffer data register is empty
1: Interrupt generated when data buffer register is empty
Note: An interrupt is generated if this bit is set and one of the following is true:
LINFlexD is in LIN mode and LINSR[DBEF] is set
LINFlexD is in UART mode and UARTSR[TO] is set
DRIE
Data Reception Complete Interrupt Enable
0: No interrupt when data reception is completed
1: Interrupt generated when data received flag (DRF) in LINSR or UARTSR is set
DTIE
Data Transmitted Interrupt Enable
0: No interrupt when data transmission is completed
1: Interrupt generated when data transmitted flag (DTF) is set in LINSR or UARTSR register
HRIE
Header Received Interrupt Enable
0: No interrupt when a valid LIN header has been received
1: Interrupt generated when a valid LIN header has been received, that is, HRF bit in LINSR register
is set
Freescale Semiconductor
PXS20 Microcontroller Reference Manual, Rev. 1
31-27